• English
  • Français
  • Deutsch
  • Español
  • China

serilor®KUT

Manual, large format diamond wheel sharpeners : 2 models up to 60”/153cm and 76”/193cm

serilor®KUT is a high quality, manually-operated sharpener for longer squeegees in two sizes to sharpen up to 60” (153cm) or 76” (193cm). Eliminates operator error by holding squeegee blade parallel to grinding wheel during sharpening.

1KUT

Machine specifications

DK-260; DK-276

Sharpening Length: 60″ (153cm) or 76″ (193cm).
Sharpening Profile: Two straight/square-edge wheels supplied as standard.
Diamond Wheel Grit: #100 and #360 grit supplied as standard (other grit sizes available).
Material removal: Recommended rate 0.002-0.005″ (0.05-0.10mm) – Grit dependent.
Blade Height Tolerance: +/- 0.006″ (0.15mm) measured from end to end.
Edge Straightness: Adjustable from -0.050″ to +0.050″ camber (-1.22mm to +1.22mm camber).
Power Requirement: 115-120v AC15Amp (230v AC optional).
Physical Size:

60’’ (153cm) Model:
Length: 80’’ (203 cm)
Height: 62’’ (157 cm)
Width: 27’’ (69 cm)

76’’ (193cm) Model:
Length: 96’’ (244 cm)
Height: 62’’ (157 cm)
Width: 27’’ (69 cm)

Advantages

  • Sharpens a wide range of squeegee materials (some materials sharpen better than others*), including single and multiple durometer.
  • Special squeegee-clamping mechanism accommodates all holder profiles without bending or flexing the blade during sharpening.
  • Unique vertical lift assures consistent parallelism between sharpening wheel and blade.
  • Includes two 6’’ indestructible diamond sharpening wheels with a 5-year warranty against diamond wear in normal use.
  • Fully enclosed sharpening wheel for maximum safety during use.
  • Prepared for the installation of a vacuum system to clean residue from the sharpened squeegee (vacuum not included).

SELECTION OF OPTIONAL GRIT SIZES AND PROFILES INCLUDING CUSTOM DESIGNED DIAMOND WHEELS FOR serilor®KUT

Square/Straight (#60, #120, #230, #360 GRIT)
Sharpens standard square-edge squeegees.
Square_straight

_________________________________________________________________________________________________

Center-sharp (#220 or #360 GRIT)
Includes 60° angle for beveling 3/16’’ (5mm) squeegees. Improves printing rough or uneven substrates.
Center_sharp

_________________________________________________________________________________________________

Center-bevel (#220 GRIT)
Two angles available (70°or 90°) for beveling standard 3/8’’ (9.5mm) squeegees. Improves printing on rough or uneven substrates.
Center_bevel

_________________________________________________________________________________________________

Round (#120 GRIT)
Rounds edges on standard 3/8’’ (9.5mm) squeegees for heavier ink deposit.
Round

_________________________________________________________________________________________________

Round/Sharp combo (#120 GRIT)
Rounds only one edge of 3/8’’ (9.5mm) or 3/16’’ (5mm) squeegees for variable ink deposit applications.
Round_sharp_combo

_________________________________________________________________________________________________

Chisel (#230 GRIT)
Includes 30° angle for chisel profiling 3/8’’ (9.5mm) or 3/16’’ (5mm) squeegees. Improves printing on 3-D substrates.
Chisel

_________________________________________________________________________________________________

*Before sharpening a squeegee, consider the quality and age of the material as well as how clean it is. .
All specifications and designs subject to change without notifications.