• English
  • Français
  • Deutsch
  • Español
  • China

serilor®KUTRONIC

Automatic, large format diamond wheel sharpeners : 4 models from 60”/153cm to 120”/305cm

serilor®KUTRONIC is a high quality, fully-automated sharpener for longer squeegees; with four models to sharpen up to 60” (153cm), 76” (193cm), 96” (244cm) and 120” (305cm).  Uniform sharpening speed, consistency of grinding pressure and material removal, all assure superior quality control.

kutronic

Machine specifications
DKTR-260; DKTR-276; DKTR-296; DKTR-2120

Sharpening Length: 60″ (153cm) – 76″ (193cm) – 96″ (244cm) – 120″ (305cm).
Sharpening Profile: Two straight/square-edge wheels supplied as standard.
Diamond Wheel Grit: Square/Straight #100 and #360 grit supplied as standard (#60 and #600 grit available by special order).
Material removal: Recommended rate 0.002-0.005″ (0.05-0.10mm) – Grit dependent.
Blade Height Tolerance: +/- 0.006″ (0.15mm) measured from end to end.
Edge Straightness: Adjustable from -0.050″ to +0.050″ camber (-1.22mm to +1.22mm camber) at full length (Note: For best performance all serilor®KUTRONIC are factory set at +0.050″camber).
Power Requirement: 115-120v AC15Amp (230v AC optional).
Physical Size:

60″ (153cm) Model:
Length: 86″ (218 cm)
Height: 62″ (157 cm)
Width: 27″ (69 cm)

76″ (193cm) Model:
Length: 102″ (259 cm)
Height: 62″ (157 cm)
Width: 27″ (69 cm)

96″ (244cm) Model:
Length: 117″ (297 cm)
Height: 62″ (157 cm)
Width: 27″ (69 cm)

120″ (305cm) Model:
Length: 141″ (358 cm)
Height: 62″ (157 cm)
Width: 27″ (69 cm)

Advantages

  • Sharpens a wide range of squeegee materials (some materials sharpen better than others*), including single and multiple durometer.
  • Special squeegee-clamping mechanism accommodates all holder profiles without bending or flexing the blade during sharpening.
  • Unique vertical lift assures consistent parallelism between sharpening wheel and blade.
  • Includes two 6’’ indestructible diamond sharpening wheels with a 5-year warranty against diamond wear in normal use.
  • Fully enclosed sharpening wheel for maximum safety during use.
  • Prepared for the installation of a vacuum system to clean residue from the sharpened squeegee (vacuum not included).

SELECTION OF OPTIONAL GRIT SIZES AND PROFILES INCLUDING CUSTOM DESIGNED DIAMOND WHEELS FOR serilor®KUTRONIC

Square/Straight (#60, #120, #230, #360 GRIT)
Sharpens standard square-edge squeegees.
Square_straight

_________________________________________________________________________________________________

Center-sharp (#220 or #360 GRIT)
Includes 60° angle for beveling 3/16’’ (5mm) squeegees. Improves printing rough or uneven substrates.
Center_sharp

_________________________________________________________________________________________________

Center-bevel (#220 GRIT)
Two angles available (70°or 90°) for beveling standard 3/8’’ (9.5mm) squeegees. Improves printing on rough or uneven substrates.
Center_bevel

_________________________________________________________________________________________________

Round (#120 GRIT)
Rounds edges on standard 3/8’’ (9.5mm) squeegees for heavier ink deposit.
Round

_________________________________________________________________________________________________

Round/Sharp combo (#120 GRIT)
Rounds only one edge of 3/8’’ (9.5mm) or 3/16’’ (5mm) squeegees for variable ink deposit applications.
Round_sharp_combo

_________________________________________________________________________________________________

Chisel (#230 GRIT)
Includes 30° angle for chisel profiling 3/8’’ (9.5mm) or 3/16’’ (5mm) squeegees. Improves printing on 3-D substrates.
Chisel

_________________________________________________________________________________________________

*Before sharpening a squeegee, consider the quality and age of the material as well as how clean it is. .
All specifications and designs subject to change without notifications.